Bfo Carbide
Ifaara
Awọn ọja jara yii nipataki bo tungsten carbide ṣofo, igi alaidun carbide, iṣẹ carbide, ati diẹ ninu awọn irinṣẹ titọ miiran. Toonney Tungsten Carbide Blank Plant, bi ọkan ninu olokiki olokiki carbide alagidi bar, ti gba orukọ rere ni ile ati ni okeere. Fun awọn ọdun wọnyi, awọn ile -iṣẹ ajeji siwaju ati siwaju sii, eyiti o yatọ lati ile -iṣẹ ẹrọ, ile -iṣẹ adaṣe, ile -iṣẹ imọ -ẹrọ ati bẹbẹ lọ, lọ fun Toonney Tungsten Carbide Blank Plant fun gbigba awọn irinṣẹ to peye to gaju, igi alaidun carbide, awọn apẹrẹ carbide pẹlu idiyele ifigagbaga.
Tungsten carbide ṣofo lati Toonney tungsten carbide òfo ọgbin ni awọn titobi oriṣiriṣi. Ile -iṣẹ Toonney tun jẹ orukọ bi Tungsten Carbide Blank Boring Bar Factory, eyiti o le ṣelọpọ igi alaidun tungsten carbide ni ọpọlọpọ awọn apẹrẹ ni ibamu si awọn ibeere alabara.
Awọn apẹrẹ Carbide:Yato si awọn igboro carbide, Toonney tun ṣe ipilẹ ẹrọ siwaju lori awọn òfo ati pese ọpọlọpọ awọn adaṣe ni ibamu si ibeere alabara ti o yatọ. Apẹrẹ bi alabara ti nilo, ati iwọn, alaye alaye ni ibeere siwaju eyiti o jẹ ki aaye carbide jẹ isunmọ si awọn ọja ti o pari ti alabara fẹ lati gba lati.
Toonney Factory Tools Factory ni ayika 50 oriṣiriṣi awọn onipò tungsten carbide ohun elo pẹlu iwọn oriṣiriṣi, gigun ati sisanra. Lẹhinna lilo awọn agbekalẹ oriṣiriṣi lati pade eyikeyi awọn ibeere pataki ni ikọja atokọ (a ni atokọ ti o wọpọ ti awọn irinṣẹ titọ fun awọn alabara ni isalẹ)
Jọwọ lero ọfẹ lati kan si wa fun alaye siwaju sii ti tungsten carbide ofifo, igi alaidun carbide, iṣẹ carbide, ati diẹ ninu awọn irinṣẹ titọ miiran.
Awọn alaye apoti: Apo ṣiṣu, lẹhinna ni aabo ni foomu dubulẹ, nikẹhin si paali ita.
Awọn nkan pataki:Tungsten carbide ṣofo eyiti o le wa lati inu akojopo deede wa, le funni bi awọn ayẹwo fun ọfẹ. Fun diẹ ninu igi tungsten carbide alaidun ati igi simẹnti pẹlu alabara alaibamu pataki ti o nilo, yoo gba owo. Nitoribẹẹ, awọn alabara nilo lati sanwo fun ọya gbigbe. Nigbagbogbo, akoko asiwaju ti awọn ayẹwo yoo wa laarin awọn ọjọ iṣẹ 7
Opoiye Bere fun Kere:Ko si opoiye aṣẹ ti o kere ju ti tungsten carbide ṣofo tabi igi alaidun carbide fun aṣẹ idanwo akọkọ. Ṣugbọn lori aṣẹ keji, iye lapapọ tungsten carbide ṣofo ati igi alaidun carbide yẹ ki o kere ju 1000USD.
Akoko Ifijiṣẹ: 7-15 ọjọ iṣẹ
Sipesifikesonu
| Ite | Iwọn ISO | Cobalt | Iwọn ọkà | Iwuwo | Líle | Líle | TRS |
| (Co%) | (μm) | (g/cm³) | (HRA) | (HV) | (N/mm²) | ||
| TU06 | K05-K10 | 6.0 | 0.4 | 14.80 | 94.0 | 2177 | 3800 |
| TF06 | K05-K10 | 6.0 | 0.6 | 14.81 | 93.1 | 2037 | 3600 |
| TU08 | K10-K20 | 8.0 | 0.4 | 14.52 | 93.5 | 2099 | 3800 |
| TU40 | K20-K40 | 10.0 | 0.8 | 14.40 | 91.8 | 1834 | 3800 |
| TU40F | K20-K40 | 10.0 | 0.6 | 14.45 | 92.3 | 1912 | 4000 |
| TU44 | K20-K40 | 12.0 | 0.4 | 14.10 | 92.8 | 1990 | 4200 |
| TU25 | K20-K40 | 12.0 | 0,5 | 14.06 | 92.5 | 1943 | 3800 |
| TU45 | K20-K40 | 13.0 | 0.4 | 13.96 | 92.6 | 1959 | 4000 |
Awọn sipesifikesonu tun le ṣee ṣe ni ibamu si awọn ibeere awọn alabara.
Ẹya -ara
Orukọ ọja: Tungsten carbide òfo/ Carbide boring bar
Ibi ti Oti: Fujian, China (Ile -ilẹ)
Oruko oja: Toonney
Nọmba awoṣe: TC
Iru: Tungsten carbide òfo/ Carbide boring bar
Ohun elo: Ohun elo carbide Tungsten
Ifarada: Bi beere.
Itọju oju:
Ipele: TU06, TF06, TU08, TU40, TU40F, TU44, TU25, TU45
Iwọn: Bi beere
Ibudo: Xiamen
Awọn ofin isanwo: FOB Xiamen
Ohun elo
1. TU06 Tungsten carbide òfo (Density of tungsten carbide blank material: 14.8; HRA ti tungsten carbide blank material: 94)
Ti o baamu fun ṣiṣe microdrilling PCB, oju -iwe milling micro ati iru awọn irinṣẹ irin ti o lagbara. Ṣe iṣeduro ohun elo lati ṣe gige milling eyiti Dia. jẹ 1.2mm ati loke.
2. TF06 Tungsten carbide òfo (Density of tungsten carbide blank material: 14.81; HRA ti tungsten carbide blank material: 93.1)
Ti o baamu fun gige aluminiomu ati alloy magnẹsia, alloy base copper, allo-base alloy, ṣiṣu, lẹẹdi, okun erogba abbl Awọn ohun elo tun-paṣẹ fun ṣiṣe lilu ati olu gige fun aluminiomu ati ohun elo magnẹsia.
3. TU08 Tungsten carbide òfo (Density of tungsten carbide blank material: 14.52; HRA ti tungsten carbide blank material: 93.5)
Agbara giga ati lile, o dara fun sisẹ ohun elo akiriliki, ohun elo ti a tun paṣẹ fun ṣiṣe adaṣe PCB ati lilu nla eyiti dia. O jẹ 0.7mm ati loke.
4. TU40 tungsten carbide òfo (Density of tungsten carbide blank material: 14.4; HRA ti tungsten carbide blank material: 91.8)
Awọn ohun elo ti a tun paṣẹ fun liluho ti o wọpọ, ọlọ opin, pataki dara lati ọlọ ati lilu ohun elo ti o wọpọ, irin grẹy, irin Austenit, ati alloy.
5. TU40F Tungsten carbide òfo (Density of tungsten carbide blank material: 14.45; HRA ti tungsten carbide blank material: 92.3)
Awọn ohun elo ti a tun paṣẹ fun ṣiṣe liluho, olulana milling ati bẹbẹ lọ, si ọlọ ati lilu irin, irin alagbara, irin ati irin aluminiomu eyiti lile jẹ ni isalẹ 50HRC.
6. TU44 Tungsten carbide òfo (Density of tungsten carbide blank material: 14.1; HRA ti tungsten carbide blank material: 92.8)
Ti o baamu fun ṣiṣe awọn oluṣeto milling ti o yatọ, reamer, awọn abẹfẹlẹ abbl ati bẹbẹ lọ ṣe pataki ni awọn irinṣẹ gige ni iyara to gaju fun apẹẹrẹ ni gige irin ti a pa, alloy aluminiomu, titanium alloy abbl.
7. TU25 Tungsten carbide òfo (Density of tungsten carbide blank material: 14.06; HRA ti tungsten carbide blank material: 92.5)
Awọn ohun elo fun ọlọ ati awọn irinṣẹ liluho si ẹrọ ohun elo itọju ooru irin, simẹnti irin, irin alagbara.
8. TU45 Tungsten carbide òfo (Density of tungsten carbide blank material: 13.96; HRA ti tungsten carbide blank material: 92.6)
Awọn ohun elo ti a tun paṣẹ fun gbogbo iru ọlọ ọlọ, atunkọ, abẹfẹlẹ fifa ati bẹbẹ lọ, ṣe dara ni agbegbe gige ina ina to gaju, ni pataki fun irin ti a pa, alloy aluminiomu, titanium alloy abbl.
Anfani
1. Didara to gaju: Ohun elo carbide Tungsten ni sipesifikesonu ti o yatọ: oriṣiriṣi ni sisanra, yiya resistance ati resistance -mọnamọna.
2. Igbesi aye iṣẹ gigun: Awọn irinṣẹ titọ Tonney ni igbesi aye iṣẹ pipẹ.
3. Iye olupese:Olupese awọn irinṣẹ konge Tonney tun jẹ olokiki ọgbin carbide kan ti o ṣofo. Nitorinaa awọn eto imulo atilẹyin ijọba kan wa, lẹhinna awọn alabara le gba “idiyele olupese”.
4. Ifijiṣẹ yarayara:Ile -iṣẹ awọn irinṣẹ titọ Tonney ni ẹgbẹ apẹrẹ amọdaju ati iwọn nla ti iṣelọpọ. Akoko ifijiṣẹ wa jẹ awọn ọjọ 7-15.
5. Idaabobo ayika: mimo laisi ohun elo atunlo
